CDMA 850MHz Full Band Repeater

CDMA 850MHz Full Band Repeater



Product Code  :  TE-9102C-C

Availability  :   In Stock

The TE9012C CDMA signal booster is used for enhancing signal in blank areas where the signal conn..

Add to Enquiry

 

The TE9012C CDMA signal booster is used for enhancing signal in blank areas where the signal connectivity from base tower is not reachable. The cdma booster provides signals in basements and useful areas where the signal strength is week or not present.

Features:

The reliability conforms to GB6993-86 standards.
The electromagnetic compatibility conforms to ETS300 609-4 standards.
Full duplex and double-end design, external power supply, and convenient installation.
Provide power indication and uplink and downlink indications.
With the amplified linear power, the intermodulation and spuriousness are suppressed effectively.
When the territory of subscribers is obviously expanded in remote villages but call traffic is not raised;
When multiple repeaters are required to fill gaps at the edge of BTS coverage area or to expand coverage for multiple rising traffic hotspots in suburb;
When BTS coverage needs to expand in an open level area where antenna isolation requirement for repeater can be hardly satisfied.

specifications
Frequency range (MHz)

Uplink 825-830

Downlink 870-880

Gain ( dB ) Uplink                          G p≥45
Downloink                  G p≥50
Export Power (dBm)( Po )                         ≥20
Pass band ripple                         ≤ 4 dB            
Guard band rejection                ≥2.5 MHz; ≤-10dBc
               ≥10 MHz; ≤-40dBc 
I/O impedance                 50Ω/N connector       
I/O return loss                       ≤-10dB
Noise figure                       ≤ 8dB
Intermodulation             (9KHz - 1GHz)≤-30dBm
( P o =13dBm)             (1 - 12.75GHz) ≤ -30dBm
Transmission Delay                        ≤ 0.5μs
Ambient temperature                     -10 C-50C
Power supply          AC110 - 220V ± 10% 45 -55Hz
Size          148mm × 106mm × 33mm
Reliability          To the GB6993-86 standard
Electromagnetic
compatibility
        To the ETS300 694-4 standard
Function     a) Power supply work display
    b) Export power display
Note         X means frequency range can be designted